Nikko 94140 - Battery Installation

2
EN
BATTERY INSTALLATION
CONTROLLER
1. To remove battery cover, loosen screw to open.
2. Insert 3 “AAA” batteries into the controller.
Be sure the + and – are properly matched.
R/C VEHICLE
NOTE: For best performance, always use alkaline batteries only.
STRONG BATTERY MEANS OPTIMUM PERFORMANCE
Save the battery by turning off vehicle when not in use.
ONOFF
ONOFF
1,5V 1,5V 1,5V 1,5V
3
4
1,5V
6
5
ONOFF
ONOFF
PLA
Y
DEMO OFF
PLA
Y
DEMO OFF
2
1
Unscrew the vehicle's
top cover and
remove it as
shown in
the illustration.
Unscrew the battery
cover and open it.
Insert 4xAA batteries
and pay attention to place
them with the correct
polarity (+/-).
Open
Open