To Next PageTo Next PageWhy is the communication unclear due to noise on my Niko 10-520?
If you experience difficulty understanding communication due to noise at the Niko Intercom System's outdoor station, it's likely that the noise is disrupting the speech signal. To resolve this, press and hold the speech key while speaking to your visitor, and release it to allow them to respond.
How to fix a whistling sound during Niko 10-520 communication?
If you hear a whistling sound during communication on your Niko Intercom System, the outdoor station may not be properly adjusted. Adjust the potentiometers for the loudspeaker and microphone at either the outdoor or indoor station until the whistling sound disappears.
What to do if my Niko 10-520 has a call but no ringtone and the red LED is on?
If your Niko Intercom System has a call but no ringtone and the red LED is on, it means that the ringer suppression is activated. To deactivate it, press the ringer suppression button. The red LED will turn off, and the ringer suppression will be disabled.
Why is there a negative tone when I press the doorbell button on my Niko 10-520?
A negative tone when pressing the doorbell button on your Niko Intercom System can be due to a programming error, an improperly installed indoor station, or the system being in programming mode. To solve this: * Clear and redo the programming to fix errors. * Check the wiring of the associated indoor station to ensure it is correctly installed. * Exit programming mode if the system is currently in it.
General| Brand | Niko |
|---|---|
| Model | 10-520 |
| Category | Intercom System |
| Language | English |
Overview of the internal audio unit's function keys and their corresponding LEDs.
Explanation of how to differentiate and potentially choose different ring tones for various call types.
Details on conductor diameter, maximum distance, and cable types for installation.
Instructions and visual guide for physically mounting the internal audio unit.
Diagram showing the rear of the device, including potentiometer and connection terminals.
Details on programming via service device and manual methods.
Overview and steps for various functions like call diversion, internal calls, and parallel calls.
Table detailing common errors, their causes, and recommended solutions.
Information on statutory regulations, proper workmanship, and installer responsibilities.
Details on the guarantee period, consumer obligations, and liability limitations.
