Need help?Do you have a question about the Nikon AF-S DX Nikkor 18-55mm/F3.5-5.6G VR and is the answer not in the manual?
General| Focal Length | 18-55mm |
|---|---|
| Maximum Aperture | f/3.5-5.6 |
| Format Compatibility | DX |
| Image Stabilization | Yes (VR) |
| Filter Size | 52mm |
| Weight | 265 g (9.3 oz) |
| Angle of View | 76° - 28° 50' |
| Maximum Reproduction Ratio | 0.31x |
| Lens Elements | 11 |
| Lens Groups | 8 |
| Diaphragm Blades | 7 (rounded) |
| Lens Mount | Nikon F |
| Autofocus | Yes |
| Dimensions (Diameter x Length) | 73 x 79.5mm (2.9 x 3.1in) |
Precautions for handling lead-free solder and required tools.
Removal of company name ring and name plates.
Removal of rubber ring and rear cover ring.
Removal of 1st and 4th lens group units.
Removal of zoom front ring and change-SW units.
Removal of bayonet mount, rear fixed tube, and contact pin units.
Removal of Main PCB and Gear units.
Removal of filter ring, zoom brush, zoom ring, focus brush.
Attaching Gyro-FPC, Zoom FPC, and Focus-FPC.
Reassembling zoom ring, filter ring, and zoom front ring.
Reassembling gear unit, main PCB, and contact pin unit.
Assembling rear fixed tube and bayonet mount units.
GND wire soldering, aperture lever, and change-SW unit adjustments.
Adjusting focus movement (T, W) using software.
Adjusting F.F.D (Back focus) with software and collimator.
Preparing optical alignment equipment and test charts.
Centering rear lens holder and placing 4th lens group.
Shooting charts and performing 4th lens group alignment.
Setting up VR equipment and starting the adjustment software.
Inspecting VR switch and adjusting VR lens position.
Adjusting VR moving direction and gyro-gain.
Criteria for evaluating VR performance.
Preparing equipment and creating test charts.
Procedure to write aberration compensation data.
List of key equipment like collimator and power supply.
Software for lens adjustment and VR equipment.
To Next Page