Why did my Nikon COOLPIX L105 Digital Camera settings reset?
If your Nikon Digital Camera settings have been reset to default, the clock battery is likely exhausted. Replace the clock battery to resolve this issue.
Why is the monitor blank on my Nikon Digital Camera?
If the Nikon Digital Camera monitor is blank, it could be due to several reasons: the camera is off, the battery is exhausted, the camera is in standby mode (press the shutter-release button halfway), the flash is charging (wait until it's done), or the camera is connected to a computer via USB or to a TV via AV cable. Please, check the list of common problems.
How to fix a Nikon Digital Camera monitor that is hard to read?
If the monitor on your Nikon Digital Camera is difficult to read, it might be dirty or the brightness may need adjustment. Clean the monitor and adjust the brightness accordingly.
Why are the date and time wrong on my Nikon Digital Camera photos?
If the date and time are incorrect on your Nikon Digital Camera recordings, it's likely because the clock wasn't set when the images were taken. Images will have a timestamp of “00/00/0000 00:00” and movies will be dated “01/ 01/2011 00:00”. Set the correct date and time using the Date option in the setup menu.
What to do if my Nikon COOLPIX L105 turns off without warning?
Your Nikon Digital Camera might be turning off unexpectedly because the battery is exhausted, it's automatically shutting down to save power, or the battery is too cold. Check the battery status.
How to display indicators on my Nikon Digital Camera monitor?
If no indicators are showing on your Nikon Digital Camera's monitor, it's possible that 'Hide info' is selected for Photo info. Change the setting to 'Show info'.
Why is the date imprint not available on my Nikon COOLPIX L105?
If the date imprint feature isn't working on your Nikon Digital Camera, it's because the camera clock hasn't been set. Set the camera clock to enable this feature.
Why is the date not showing on my Nikon COOLPIX L105 images with date imprint enabled?
If the date isn't showing on your Nikon Digital Camera images even with Date imprint enabled, it could be due to the current shooting mode not supporting it, a selected feature being incompatible, or because you're recording movies. Change the shooting mode to one that supports date imprint.
What to do if the monitor turns off and the power-on lamp blinks rapidly on my Nikon Digital Camera?
If the monitor of your Nikon Digital Camera turns off and the power-on lamp blinks rapidly, the battery temperature is likely too high. Turn off the camera and allow the battery to cool down before using it again.
General| Sensor Resolution | 12.1 MP |
|---|---|
| Optical Zoom | 15x |
| Digital Zoom | 4x |
| Image Sensor | CCD |
| Video Recording | Yes |
| Sensor Type | CCD |
| Effective Pixels | 12.1 million |
| Display Size | 3.0 inches |
| Battery Type | AA |
| ISO Sensitivity | 80-1600 |
| Lens | NIKKOR |
| Maximum Aperture | f/3.5-5.4 |
| Image Sensor Size | 1/2.3 inch |
| Lens Type | Zoom lens |
| Focal Length | 28-420mm (35mm equivalent) |
| LCD Monitor | 3.0-inch TFT LCD |
| Storage Media | SD memory card |
| Continuous Shooting | Single (default setting), Continuous H (up to 3 frames continuously), Continuous L (up to 6 frames continuously) |
Explains the purpose and conventions used in the user manual.
Provides crucial safety precautions and warnings to prevent injury or damage.
Identifies and describes the physical components and buttons of the camera.
Guides on inserting batteries/cards and initial camera setup like date/language.
Explains how to select and use different shooting modes like Easy Auto, Scene, and Auto.
Details on achieving proper focus, adjusting exposure compensation, and using the flash.
Covers automatic smile detection shooting and high-speed continuous shooting modes.
Instructions for recording, playing back, and managing video files with sound.
Covers viewing images, using playback zoom, and basic in-camera editing functions.
Guides on connecting the camera to TVs, computers, and printers.
Explains setup menu options and general camera maintenance procedures.
Lists common problems, solutions, error messages, and camera technical specifications.
To Next Page
