What to do if no picture is taken when shutter-release button is pressed on Nikon Coolpix L15?
If no picture is taken when you press the shutter-release button on your Nikon Digital Camera: * When the camera is in playback mode: Press the shooting mode button. * When menus are displayed: Press d. * The battery is exhausted: Replace the battery. * When the flash lamp blinks, the flash is charging: Wait for the flash to charge.
How to fix date and time on Nikon Digital Camera?
If the date and time are not correct on your Nikon Digital Camera recordings: * If pictures were recorded before the clock was set: Set the correct date and time from [Date] in the setup menu. * Check camera clock regularly against more accurate timepieces and reset as required: Regularly check and reset the camera clock.
Why is the monitor blank on my Nikon Coolpix L15?
The monitor on your Nikon Digital Camera might be blank due to several reasons: * The camera is off: Turn on the camera. * The battery is exhausted: Replace the battery. * The camera is in standby mode: Press the shutter-release button halfway. * The flash lamp is blinking red: Wait until the flash has charged. * The camera is connected to a computer via USB cable: Disconnect the USB cable. * The camera is connected to a TV via A/V cable: Disconnect the A/V cable.
What to do if my Nikon Coolpix L15 turns off without warning?
If your Nikon Digital Camera turns off unexpectedly, here are a few possible causes: * Batteries are low: Replace the batteries. * The camera has turned off automatically to save power: Turn on the camera. * Batteries are cold: Warm up the batteries.
Why does my Nikon Digital Camera flash not fire?
The flash on your Nikon Digital Camera might not fire because: * The flash is off: Turn on the flash. * A scene mode that cannot turn on flash is selected: Change the scene mode. * Movie mode (other than [Stop-motion movie]) is selected: Change to a different shooting mode. * [Continuous], [BSS] or [Multi-shot 16] is selected for [Continuous]: Change the continuous shooting setting.
What causes unexpected results when flash set to V (auto with red-eye reduction) on my Nikon Coolpix L15 Digital Camera?
If V (auto with red-eye reduction) or fill flash with slow sync and red-eye reduction in e ([Night portrait] scene mode) is used, in-Camera Red Eye Fix may, in very rare cases, be applied to areas not affected by red-eye on your Nikon Digital Camera. Use flash modes other than V (auto with red-eye reduction) and take pictures in the shooting mode other than e [Night Portrait].
Why is [Image mode] not available on my Nikon Coolpix L15?
[Image mode] cannot be adjusted when [Multi-shot 16] is selected for [Continuous] on your Nikon Digital Camera. Change the continuous setting.
Why does the AF-assist illuminator not light on my Nikon Coolpix L15 Digital Camera?
The AF-assist illuminator on your Nikon Digital Camera might not light because: * [Off] is selected for AF assist option in camera setup menu: Turn on AF assist. * AF-assist illuminator turns off automatically in some modes.
How to fix randomly spaced bright pixels (“noise”) that appear in image on Nikon Digital Camera?
If you are seeing randomly spaced bright pixels (noise) in your Nikon Digital Camera images, it could be due to: * Shutter speed too slow or ISO sensitivity too high: Use flash. * Choose scene mode with noise reduction.
What causes unnatural colors in Nikon Coolpix L15 Digital Camera photos?
If the colors in your Nikon Digital Camera photos appear unnatural, it's likely that the white balance does not match the light source. Adjust the white balance to correct this.
General| Image Sensor Type | CCD |
|---|---|
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| Type | Compact |
| Screen Size | 2.8 inches |
| Battery Type | AA (Alkaline or NiMH) |
| Supported Flash Memory | SD, SDHC |
| Effective Pixels | 8.0 MP |
Essential safety precautions to prevent damage and injury when using the camera.
Guide to powering on the camera and selecting the Easy Auto mode.
How to position the camera and subject for optimal framing.
Process for focusing on the subject and capturing the image.
How to review and remove captured photos from the camera.
Settings for image quality, white balance, continuous shooting, and color options.
Configuration options for date, language, monitor, and other camera settings.
Common error indicators and troubleshooting steps for resolving camera issues.
Solutions for common problems encountered during camera operation.
To Next Page
