How to fix randomly spaced bright pixels (“noise”) that appear in image on Nikon Digital Camera?
If you are seeing randomly spaced bright pixels (noise) in your Nikon Digital Camera images, it could be due to: * Shutter speed too slow or ISO sensitivity too high: Use flash. * Choose scene mode with noise reduction.
What to do if my Nikon Coolpix L15 Digital Camera cannot focus?
If your Nikon Digital Camera is having trouble focusing: * The intended subject is one with which autofocus does not perform well: Set [AF assist] in the setup menu to [Auto]. * There is a focus error: Turn the camera off and then on again.
What causes unnatural colors in Nikon Coolpix L15 Digital Camera photos?
If the colors in your Nikon Digital Camera photos appear unnatural, it's likely that the white balance does not match the light source. Adjust the white balance to correct this.
Why are my Nikon Coolpix L15 Digital Camera pictures too dark (underexposed)?
If your Nikon Digital Camera pictures are too dark, it could be due to: * The flash is off: Turn on the flash. * The flash window is blocked: Unblock the flash window. * The subject is beyond flash range: Move closer to the subject. * Adjust exposure compensation: Adjust the exposure compensation settings. * The subject is backlit: Select o ([Backlight] scene mode) or use fill flash.
Why do bright specks appear in pictures taken with flash on my Nikon Digital Camera?
If you see bright specks in pictures taken with the flash on your Nikon Digital Camera, it might be because the flash is reflecting off particles in the air. Turn the flash off to resolve this.
Why is Nikon Transfer not starting when my Nikon Coolpix L15 Digital Camera is connected?
Nikon Transfer might not start when your Nikon Digital Camera is connected due to: * The camera is off: Turn on the camera. * The battery is exhausted: Replace the battery. * The USB cable is not correctly connected: Connect the USB cable correctly. * The camera is not recognized by the computer: Ensure the camera is recognized by the computer. * If your computer is running Windows 2000 Professional, your camera cannot be connected: Use a different computer. * The computer is not set to launch Nikon Transfer automatically: Set your computer to launch Nikon Transfer automatically.
How to fix a hard to read monitor on Nikon Digital Camera?
If the monitor on your Nikon Digital Camera is hard to read: * Adjust the monitor brightness. * Clean the monitor. * Note that the monitor brightens when controls are used if it has dimmed to save power.
Why does my Nikon Digital Camera flash not fire?
The flash on your Nikon Digital Camera might not fire because: * The flash is off: Turn on the flash. * A scene mode that cannot turn on flash is selected: Change the scene mode. * Movie mode (other than [Stop-motion movie]) is selected: Change to a different shooting mode. * [Continuous], [BSS] or [Multi-shot 16] is selected for [Continuous]: Change the continuous shooting setting.
What to do if my Nikon Coolpix L15 turns off without warning?
If your Nikon Digital Camera turns off unexpectedly, here are a few possible causes: * Batteries are low: Replace the batteries. * The camera has turned off automatically to save power: Turn on the camera. * Batteries are cold: Warm up the batteries.
Why is the monitor blank on my Nikon Coolpix L15?
The monitor on your Nikon Digital Camera might be blank due to several reasons: * The camera is off: Turn on the camera. * The battery is exhausted: Replace the battery. * The camera is in standby mode: Press the shutter-release button halfway. * The flash lamp is blinking red: Wait until the flash has charged. * The camera is connected to a computer via USB cable: Disconnect the USB cable. * The camera is connected to a TV via A/V cable: Disconnect the A/V cable.
General| Image Sensor Type | CCD |
|---|---|
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| Type | Compact |
| Screen Size | 2.8 inches |
| Battery Type | AA (Alkaline or NiMH) |
| Supported Flash Memory | SD, SDHC |
| Effective Pixels | 8.0 MP |
Essential safety precautions to prevent damage and injury when using the camera.
Guide to powering on the camera and selecting the Easy Auto mode.
How to position the camera and subject for optimal framing.
Process for focusing on the subject and capturing the image.
How to review and remove captured photos from the camera.
Settings for image quality, white balance, continuous shooting, and color options.
Configuration options for date, language, monitor, and other camera settings.
Common error indicators and troubleshooting steps for resolving camera issues.
Solutions for common problems encountered during camera operation.
To Next Page
