Taking Pictures for a Panorama (_ 31)
The camera focuses on the subject in the center of the frame. Use a tripod
for better results.
2
Highlight l:_ (Panorama assist)
and press the center of the multi
selector.
o
O-
t_
3
Highlight the desired pan direc-
tion and press the center of the
multi selector.
The arrow showing the selected
direction turns white.
• The direction can be re-selected by
pressing the center of the multi selector
again.
• If the first shot istaken without decid-
ing the pan direction, it will be auto-
matically set for the right.
4
4
Take the first picture.
The first picture is displayed in about
1/3 of the monitor. AE-L icon is dis-
played to show that white balance
and exposure have been locked at
values for first shot.
Compose the next shot to overlap
with the previous picture and
take the second picture.
Repeat until the entire series of pic-
tures has been taken.
32
To Next Page
Loading...
Need help?
General
