112
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
h Sound Settings
Adjust the following sound settings.
I Record Orientation
Choose whether or not to record the orientation of pictures taken in “tall”
orientation.
Choose [Auto] (default setting) to record the picture’s orientation detected
by the camera’s sensor. The taken picture will be automatically rotated in
playback mode. When [Off] is selected, the picture will be displayed in the
same orientation as it was taken.
Picture orientation information can be modified from the [Rotate image]
option in the playback menu (c 100).
i Auto Off
Choose the time allowed to elapse before the camera enters standby mode
to save power (c 21). The time options are [30s], [1m] (default setting),
[5m], and [30m]. The power-on lamp flashes in standby mode. If no opera-
tions are performed for another three minutes, the camera turns off.
k Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes, when [30s]
or [1m] is selected for [Auto off] and menus are displayed, and 30 minutes, during continuous
playback for slide shows and Pictmotion movies or when the optional AC adapter is con-
nected.
Button sound
When [On] (default setting) is selected, beep will sound once when operations
are completed successfully, twice when the camera acquires focus on the sub-
ject, and three times when error is detected.
Shutter sound
Turn shutter sound on or off. The default setting is [On].
To Next Page
Loading...
Need help?
General
