226
Q
Direct USB Connection
Connect the camera using the supplied UC-E4 USB cable.
1 Select a USB option.
Before connecting the camera to the computer, make sure the
correct option is selected for the [USB] item in the camera
setup menu (pg. 225).
2 Turn the camera off.
3 Turn the computer on.
Turn the computer on and wait for it to start up.
4 Connect the USB cable.
Connect the USB cable as shown.
Do not use force or attempt
to insert the connectors at an angle.
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
Power switch
To Next Page
Loading...
