Nikon D300 - Using the Flash

12
Using the Flash
Raise the flash.
Press the flash pop-up button.
The built-in flash will pop up
and begin charging.
When the
flash is fully charged, the flash-
ready indicator (c) will light.
Choose a flash mode.
Press the M button and rotate the main command dial
until the desired flash mode icon is displayed in the
control panel.
Flash pop-up button
1
2
Control panelMain command
dial
M button
Display Mode Display Mode
Front-curtain
sync
Slow sync
Red-eye
reduction
Rear-curtain sync
Red-eye
reduction with
slow sync