x
A
Observe proper precautions when handling
batteries
Batteries may leak or explode if
improperly handled.
Observe the
following precautions when handling
batteries for use in this product:
• Use only batteries approved for use in
this equipment.
• Do not short or disassemble the battery.
• Be sure the product is off before
replacing the battery.
If you are using
an AC adapter, be sure it is unplugged.
• Do not attempt to insert the battery
upside down or backwards.
• Do not expose the battery to flame or to
excessive heat.
• Do not immerse in or expose to water.
• Replace the terminal cover when
transporting the battery.
Do not
transport or store the battery with
metal objects such as necklaces or
hairpins.
• Batteries are prone to leakage when
fully discharged.
To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• When the battery is not in use, attach
the terminal cover and store in a cool,
dry place.
• The battery may be hot immediately
after use or when the product has been
used on battery power for an extended
period.
Before removing the battery
turn the camera off and allow the
battery to cool.
• Discontinue use immediately should
you notice any changes in the battery,
such as discoloration or deformation.
A
Observe proper precautions when handling the
charger
• Keep dry.
Failure to observe this
precaution could result in fire or electric
shock.
• Do not short the charger terminals.
Failure to observe this precaution could
result in overheating and damage to
the charger.
• Dust on or near the metal parts of the
plug should be removed with a dry
cloth.
Continued use could result in fire.
• Do not go near the charger during
thunderstorms.
Failure to observe this
precaution could result in electric
shock.
• Do not handle the plug or charger with
wet hands.
Failure to observe this
precaution could result in electric
shock.
• Do not use with travel converters or
adapters designed to convert from one
voltage to another or with DC-to-AC
inverters.
Failure to observe this
precaution could damage the product
or cause overheating or fire.
A
Use appropriate cables
When connecting cables to the input and
output jacks, use only the cables
provided or sold by Nikon for the
purpose to maintain compliance with
product regulations.
A
CD-ROMs
CD-ROMs containing software or
manuals should not be played back on
audio CD equipment.
Playing CD-ROMs
on an audio CD player could cause
hearing loss or damage the equipment.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
