130 P, S, A, and M Modes
Autoexposure Lock
Use autoexposure lock to recompose photographs after using
M (Center-weighted metering) and N (Spot metering) to
meter exposure; note that autoexposure lock is not available in
i or j mode.
1 Lock exposure.
Position the subject in the selected
focus point and press the shutter-
release button halfway.
With the
shutter-release button pressed
halfway and the subject positioned in
the focus point, press the A (L)
button to lock exposure.
While exposure lock is in effect, an AE-L
indicator will appear in the viewfinder
and the monitor.
2 Recompose the
photograph.
Keeping the A (L) button
pressed, recompose the
photograph and shoot.
Shutter-release
button
A (L) button
To Next Page
Loading...
