Nikon D610 - Page 153

127
r
❚❚ Protecting a White Balance Preset
Follow the steps below to protect the selected white balance preset. Protected
presets can not be modified and the Fine-tune and Edit comment options can not
be used.
1 Select L (Preset manual).
Highlight Preset manual in the white
balance menu and press 2.
2 Select a preset.
Highlight the desired preset and press
W (S).
3 Select Protect.
Highlight Protect and press 2.
4 Select On.
Highlight On and press J to protect the
selected white balance preset.
To remove
protection, select Off.
W (S) button