Page4
Adapter for 4 AA Batteries
(use when rechargeable
batteries are discharged)
1.2 Charge Camera Batteries
To remove the battery pack from the camera body, open the door on the bottom of the
camera by moving the release lever. When the battery access door opens, move the
yellow release lever until the battery pack pops free. There is one battery pack in the
battery grip. To remove the battery pack from the battery grip, pull the release ring out
and turn counter-clockwise to open the battery grip. Slide the insert out and remove
the battery by pressing the button marked “push” and slide the battery free. Charge
each battery pack, one at a time, and bring the batteries to full charge. The indicator
light will flash during charging. When fully charged, the light will illuminate
continuously.
To Next Page
Loading...
