
Do you have a question about the Nikon D70 VBA10401 and is the answer not in the manual?
| Brand | Nikon |
|---|---|
| Model | D70 VBA10401 |
| Category | Digital Camera |
| Language | English |
Instructions for separating the front and rear bodies of the camera.
Steps to remove and discharge the rear cover of the camera.
Procedure to detach the memory compression PCB.
Steps to remove the DC/DC PCB.
Steps to remove the top cover and external LCD unit.
Procedure to detach the built-in SB upper case.
Steps to remove the SB lower case unit.
Procedure to detach the mode dial PCB unit.
Procedure to disconnect FPCs from the front body.
Steps to remove the eyepiece unit and metering FPC unit.
Exploded view of the Penta unit assembly.
Procedure to detach and remove the main PCB.
Steps to remove the AF sensor unit.
Steps to detach the shutter unit.
Procedure to remove the inner LCD unit.
Step-by-step instructions for the aperture control unit.
Steps to remove the IF-PCB from the rear body.
Procedure to remove the CF-PCB and ground plate.
Steps to detach the sub-PCB and SB-PCB.
Exploded view of small parts for the rear body.
Assembly and adjustment steps for the front body.
Procedure for assembling the mirror unit with pins and adhesive.
Grease application instructions for aperture lever unit.
Steps to remove the horizontal lever and AF driving unit.
Assembly of bayonet unit and AF lens contacts.
Procedure for adjusting the height of the AF coupling shaft.
Procedure for measuring and adjusting aperture lever height.
Procedure and standards for adjusting the main mirror.
Procedure and standards for adjusting the sub-mirror.
Connecting PC for accuracy inspection and adjustment.
Steps to install the D70 Inspection and Adjustment Software.
Instructions for starting and navigating the D70 software.
Procedure for AE CCD alignment and adjustment.
Procedure for AF accuracy and other AF adjustments.
Overview of functions in the shooting image adjustment software.
Step-by-step procedure for shooting image adjustments.
List of tools required for camera inspection and adjustment.