Nikon D70 VBA10401 - SB-PCB; Sub-PCB

VBA10401-R.3623.A
- Ｄ24 ･ -
・
Remove the soldering bridges on the sub-PCB (#B1002) and
solders of 8 wires.
Main-SW FPC
Soldering bridge
Both-sided adhesive tape on
backside of FPC
#B1002
#B1011
・
Remove the soldering bridges on
the sub-PCB (#B1002) to detach
the main-SW FPC (#B1011).
Soldering bridge
Yellow:
Distinguish SW
Black:SB PCB
Red:SB PCB
Blue:SQ motor
Orange:SQ motor
Brown:
AF assist lamp
SB-PCB / Sub-PCB
・
Take out the screw (#664) and 2 screws (#684)
so that the sub-PCB (#B1002) and SB-PCB
(#B1041) are detached. The AF assist lamp
(#B325) comes off, too.
#664
#B325
#684×2
#B1002
#B1041
Rear body
#1065
：
Set aside by passing through
the hole of the rear body.
Green:
Distinguish SW
Blue:
AF assist lamp