Nikon D70 VBA10401 - Disassembly; Separate Front and Rear bodies

VBA10401-R.3623.A
- Ｄ1 ･ -
Disassembly
�
内部に高電圧部あり。カバーを外す時は感電に注意すること。
カバーを外した後は、修理指針の指示に従ってメインコンデン
サーの放電を必ず行うこと。
警告
Note
： ①
When disassembling/(re)assembling, be sure to use the conductive mat (J5033) and wrist strap
(J5033-5) for static protection of electrical parts.
②
Before disassembling, be sure to remove batteries or AC power wires.
③
When disassembling, make sure to memorize the processing state of wires and FPC, screws to be
xed and their types, etc.
④
Because the low pass lter of the imaging CCD PCB is easily damaged, handle it with enough
care.
1. Separate Front and Rear bodies
#692
#697
#677×6
Bottom cover
Open I/F cover
WARNING
Due to an internal high voltage area, take extra care not to get an
electric shock when detaching covers.
After removing covers, be sure to discharge the main condenser
according to the instructions of the repair manuals.
Bottom Cover