Nikon D70 VBA10401 - CF-PCB

VBA10401-R.3623.A
- Ｄ23 ･ -
#1064
#663×2
#B1034
#B467
CF-PCB
・
Take out 2 screws (#635) to remove the
CF-PCB and CF ground plate (#469).
Remove FPC by pulling
aside in the direction of
the arrow.
#635×2
CF-PCB
#467
Rear body
Main condenser
Remove the 2 wires (pink and blue) as
described left while setting aside by
passing them through this hole.
#754×2
Remove the solders of 2 wires (pink
and blue) on the SB-PCB of the front
of the rear body.
SB-PCB
Blue:Main condenser
Pink:Main condenser
#1043