Nikon D70 VBA10401 - Shooting Image Adjustment Software

VBA10401-R.3623.A
- Ａ47 ･ -
2. Shooting image adjustment software
Adjustments
of
Parts to be
replaced
Sensitivity
Gr/Gb
compensation
ADJ (R/B
lter)
Sensitivity
ratio
CCD black
point defect
compensation
CCD white
point defect
compensation
TFT
view angle
CCD-
PCB
EEPROM
Flash up
TFT
EEPROM
Flashram up
Upgrade
RISC
rmware
Shutter unit
Main PCB unit
AF sensor unit
DC/DC PCB unit
Metering FPC unit
Memory compression
PCB
○ ○ ○
CF PCB
I/F PCB
CCD PCB unit
○ ○ ○ ○ ○
TFT PCB or
TFT monitor
○ ○
*1. Check the type of TFT monitor (NEW or OLD) befor execute " TFT EEPROM Flash up".
The type is mentioned on the label of TFT monitor. (NEW=262CGX405**** or later )
*2. Execute " TFT EEPROM Flash up" rst, then adjust "
TFT view angle”.
Check the type of TFT monitor (NEW or OLD) befor execute " TFT EEPROM Flash up".
The type is mentioned on the label of TFT monitor. (NEW=262CGX405**** or later )
*1.
*2.