Need help?Do you have a question about the Nikon DI series and is the answer not in the manual?
Follow installer instructions to install Nikon View 4.
Camera must be registered as hardware device upon initial computer connection.
Requires logging in as 'Computer Administrator' for installation, uninstallation, and usage.
Procedure to reinstall camera drivers if 'Found New Hardware Wizard' fails or device is misconfigured.
Nikon View starts automatically when a camera is connected via IEEE1394 and powered on.
AutoPlay window appears when a memory card is inserted into a card reader or PC card slot.
NEF files cannot be copied using the 'Microsoft Scanner and Camera Wizard' option.
Prevent AutoPlay window by selecting 'Copy pictures... Nikon View 4' and 'Always do the selected action'.
Setting 'Always do the selected action' enables auto-start for Nikon View 4 with memory cards.
For non-Nikon cameras, avoid checking 'Always do the selected action' in AutoPlay.
Display AutoPlay window after setting 'Always do the selected action' via My Computer.
Outlines AutoPlay window options for file transfer, printing, slideshows, and file viewing.
Certain AutoPlay options do not support NEF files; use Nikon View 4 for NEF transfer.
To Next Page
General