VI Basic Operations TOOL
3 Measuring Two-point Distance or Entering Information—TOOL Menu
- 65 -
Saving or printing the overlay
If you save or print an image while an overlay on it is being displayed, the overlay image
is written over the photographed image when it is saved or printed.
In this case, the photographed image and the overlay are integrated into a single image
when saved, so you cannot erase the overlay from the saved image.
If the overlay is hidden while you save or print, only the photographed image is saved or
printed.
• If you want to save an overlay by writing it over the image, we recommend saving it
in an image size of 1280*960. For a 640*480 image size, it is possible that part of
the text will be dropped.
Furthermore, if the image is saved in JPEG format, we recommend selecting a low
compression rate such as Fine or Normal.
• For details, refer to “1.4.2 Image File Settings－File Settings” in Chapter VI.
• Select the appropriate image size according to its intended use by referring to the
table shown below.
File Type BMP JPEG
Fine
JPEG
Normal
JPEG
Basic
JPEG
Draft
2560*1920 Overlay cannot be saved
1280*960
Most
suitable
Small characters are not suitable
640*480 Any overlay other than textual notation is possible.
To Next Page
Loading...
Need help?
General
