Nikon DS-L3 User Manual (English)

Other manuals for Nikon DS-L3

Questions and Answers:

C
Cynthia FigueroaAug 1, 2025
Why is my Nikon Camera Accessories power not coming on?
- L
  Larry GarnerAug 1, 2025
  The Nikon Camera Accessories might not be powering on due to several reasons: * The AC adapter might not be properly connected. Ensure the DC output cable of the AC adapter is connected to the 12VDC IN connector of the DS-L3. * The power supply cord might be incorrectly connected to the AC adapter. Use the correct power supply cord to plug the AC inlet of the AC adapter into the AC outlet. * The power switch might be off. Press the power switch to turn the DS-L3 on; press it again to turn it off.
S
Scott DavisAug 7, 2025
What to do if images are not displayed on the Nikon DS-L3 embedded monitor?
- M
  Megan DudleyAug 7, 2025
  If images are not showing on the embedded monitor of your Nikon Camera Accessories, check the following: * Ensure the DS camera head is securely connected. Turn off the DS-L3, then use the DS camera cable to connect the Camera Out connector of the DS camera head to the Camera connector of the DS-L3. * Verify that the C mount cap is removed from the DS camera head. * Confirm that the subject image is correctly positioned for capture. * Ensure the optical path of the optical device is correctly set on the camera side. * Check that the illumination and exposure settings of the optical device are appropriate for the subject.
S
stevenparkerAug 13, 2025
What to do if images are not displayed on the Nikon Camera Accessories embedded monitor when the external monitor is connected?
- R
  Ruben MatthewsAug 13, 2025
  If you've connected an external monitor and the embedded monitor on your Nikon Camera Accessories isn't displaying images, the embedded monitor display might be turned off. To resolve this, change the setting of the [DISPLAY MODE] button in [INTERNAL LCD] within the [SETUP MENU : MAIN] window.
J
joshuacurtisAug 18, 2025
Why does my Nikon Camera Accessories turn off automatically?
- A
  Autumn KeithAug 18, 2025
  Your Nikon Camera Accessories might be turning off automatically because the Power Save Timer is activated. If no button is pressed for a set time, the system enters standby mode. Any action will bring it out of standby. You can adjust the auto power save setting in the [SETUP MENU: ADDITIONAL] window.
A
Amy TapiaAug 25, 2025
Why is my Nikon DS-L3 device hot when touched?
- J
  Jonathan JohnsonAug 26, 2025
  If your Nikon Camera Accessories feels hot, it may be due to use in a hot or confined space. Ensure the DS-L3 is used within the operating environment specified in “21 Major Specifications”. If you notice an unusual odor, such as a burning smell, immediately turn off the power, disconnect the AC adapter, and request repairs.