Nikon DS-L3 Quick Reference

6
This section describes how to measure a length, angle, diameter or circumference of a circle, or polygon area, etc. on the monitor.
Open the [TOOL BAR] screen.
[TOOL BAR] is used for measurement.
Single-row button display
Two-row button display
Switching [TOOL BAR] display
Select a registered calibration setting.
Specifying a calibration setting ([TOOL BAR] screen)
Note: For details of calibration registration, see “11.2.4
Registering Calibration Values” in “Camera Operation”
instruction manual.
Specify the unit.
[TOOL SET: MAIN]
Specifying the unit ([TOOL SET: MAIN] screen)
M
M
e
e
a
a
s
s
u
u
r
r
e
e
m
m
e
e
n
n
t
t
Press to show the lower row of buttons.
Press to hide the lower row of buttons.
2
2
2
1
1
1
Open the [TOOL BAR] window.
Press the [T.BAR] button on the
task bar to open [TOOL BAR].
Select a registered
calibration setting.
Press the calibration
button in the lower row of
[TOOL BAR] to open the
submenu and select the
desired calibration
setting.
3
2
1
3
3
3
Open the [TOOL SET:
MAIN] screen.
Press the [TOOL SET]
button on the [TOOL
MENU] screen to open
the submenu and select
[MAIN].
Specify the unit.
Press the [UNIT] button
on the [TOOL SET:
MAIN] screen to open the
submenu and select the
desired unit.
Return to [TOOL MENU].
After selecting the unit,
press the [
TOOL]
button to return to the
[TOOL MENU] screen or
press the [X] button to
close the [TOOL SET:
MAIN] screen.

Nikon DS-L3 Specifications

General

Brand	Nikon
Model	DS-L3
Category	Camera Accessories
Language	English