Need help?Do you have a question about the Nikon F2AS PHOTOMIC and is the answer not in the manual?
Load film by opening the camera back, inserting the cartridge, and securing the leader onto the take-up spool.
Adjust the ASA film-speed index ring to match the film's ISO for accurate exposure metering.
Select desired shutter speed using the finder's selector, including B and X settings for various exposures.
Adjust the lens aperture by turning the aperture ring to the desired f/number setting.
Use LED indicators in the viewfinder to set correct exposure by adjusting shutter speed and aperture.
Meter low-light scenes requiring slow shutter speeds up to 10 seconds.
Perform long exposures using the 'B' setting and T-L fingerguard for shutter control.
Correct exposure based on lens/screen combinations using the ASA film-speed index ring.
Apply exposure corrections for copying or photomicrography using film-specific adjustments.
Mount lenses with meter coupling ridges by aligning indexes and twisting until locked.
Mount lenses without coupling ridges after locking the meter coupling lever.
Camera Specifications| type of camera | 35mm single-lens reflex (SLR) |
|---|---|
| picture format | 24mm x 36mm |
| lens mount | Nikon F mount (bayonet type) |
| shutter | Horizontal-travel focal-plane shutter; speeds of from 1 to 1/2000 second and “B” |
| flash synchronization | Automatic selection as shutter speed is set; hot-shoe contact with built-in safety switch |
Exposure and Metering| exposure metering | Through-the-lens, center-weighted, full-aperture measurement |
|---|---|
| metering range | EV—2 ~ EV 17 with 50mm f/1.4 lens and ASA 100 |
| film speed scale | ASA12 ~ 6400 |
Weight and Dimensions| weight | 840g |
|---|---|
| dimensions | 152.5mm x 102mm x 64.5mm |
To Next Page
