Nikon F50 - ISO CONFIRMATION;SETTING

ISO CONFIRMATION/SETTING
ItJ
<Q) cO OeQ])
~ r- - A-
i :J fSo~ 400
To confirm ISO film speed for OX-coded
film:
Usable film speed range of DX -coded film is ISO 25
to 5000.
With the Exposure Mode Menu, press the menu button
to activate the Optional-Function Menu. Press the
button above
IS O. The LCD shows the ISO film speed
of the loaded DX-coded mm.
To retu
rn to the last selected exposu re modelProgram,
press the button above
IS O.
With a OX-coded film, film speed is automatically
set on the camera body; you cannot adjust.
Pre ss to adjust
Co ® ®
e~ ~;: - ===::::~~ -- Press to comp le te setting
To manually set ISO film speed for non-
OX-coded film:
When using non-DX-coded film, manually set the ISO
film speed number. Usable film speed range is ISO
6
to 6400.
If you have installed non-DX-coded film and closed
the camera back, the ISO setting screen
is
automatically activated on the LCD panel. Adjust the
film speed by pre
ss ing the button above the . (u p) or
T (down) indication. To change film speed rapidl y,
hold tbe button down. To complete the setting, press
the button above
IS O. The LCD shows the last selected
exposure mode/Program .
• Until setting is completed, the sbutter remains
locked, a
nd the menu button is deactivated.
• If you want to recall the ISO setting screen after
completing the setting, activate the Optional-
Function Menu and press the button above
ISO.
35