Nikon F50 - MOUNTING LENS; Usable Lenses; With a non-CPU lens

MOUNTING LENS
1
Remove the camera body cap
and the front and rear lens
caps.
2
Position the lens in the
camera's bayonet mount so
the mounting indices on the lens
and the camera body are aligned.
Twist the lens counterclockwise
until it locks into place.
~
, I I /
I .: ,,-1 __ - Err , ~
- 71-'
With a non-CPU lens
When the camera is
powered on with a non-
CPU len
s, Err a nd m blink in
the LCD panel and E ~ ~
blinks inside viewfi nd er.
For using a non-CPU lens,
see page 58.
Usable Lenses
When mounting
lens-
Use CPU lenses (AF Nikkor lenses and AF-S/AF-I/
AI-P lenses). Other Nikon and Nikkor lenses (non-
CPU lenses) can be mounted, but you have
to use
an external exposure meter, and the only usable
exposure mode is Manual. (See page
58) .
• AF-SIAF-IIAI-P lenses are for manual focus only.
• Avoid direct sunlight.
• Make sure
the camera's power is off.
• Do
not touch the lens release button.
7