Nikon Fun>Touch 2 User Manual

Installing the Batteries
(1) Open the battery compartment cover by pushing in the direction of arrow.
(2) Insert two new AA size alkaline batteries with the correct positive (+) and
negative (—) polarity as indicated by the printed diagram inside the battery
compartment.
(3) Push down the battery compartment cover to close securely.
• Replace the batteries when:
A) The film winding speed is slower than usual.
B) The green LED does not come on within 10 sec, after depressing the
shutter release button halfway with the lens cover opened.
A or B means that the batteries are weak and there may be insufficient power to
operate the camera.
NOTE: Manganese batteries and Ni-Cd re-chargeable batteries cannot be used.
—2—

Nikon Fun>Touch 2 Specifications

General

Brand	Nikon
Model	Fun>Touch 2
Category	Film Camera
Language	English