Nikon Key Mission 170

To Next Page

YP6K01(11)

6MQA5511-01

Printed in China

Procedure for Pairing for the First Time (for iOS Users)

Here, pairing refers to the setting used to connect the camera and smartphone or tablet (below, “smart device”)

through Bluetooth.

Parts of the Camera

Photo button

Movie button

k button

Before Pairing

Camera

• Insert a microSD memory card with suﬃcient free space into the camera.

• Check that the battery is suﬃciently charged so that the camera does not turn oﬀ during the procedure.

Smart device

• Two apps are available: “SnapBridge” and “SnapBridge 360/170”. Use “SnapBridge 360/170” when

pairing your device with this camera.

• Do not pair from the Bluetooth setting screen of the smart device.

Pairing Procedure

1 Check that the camera is o (the screen is o).

• To turn oﬀ the camera, press and hold the movie button for at least three seconds.

2 Enable Bluetooth and Wi-Fi® on the smart device.

• Do not pair from the Bluetooth setting screen of the smart device.

3 Install the SnapBridge 360/170 app.

4 Press the movie button or photo button to turn on the camera.

5 Press H or I to highlight a language, and press the k button to select it.

6 Press I to scroll through the screen, select Options, and press

the k button.

B If You Select Later

If Later is selected, you can follow the procedure below to display the screen in step 6

and perform pairing later.

Press the k button to display the menu M c (setup) menu M Camera settings M

Network menu M Connect to device.

set SnapBridge later

from the Network menu,

select Later.

Options

Later

Need help?

Do you have a question about the Nikon Key Mission 170 and is the answer not in the manual?

Summary

Nikon KeyMission 170 iOS Pairing Guide

Camera Components Identification

Identifies physical buttons like Photo, Movie, and OK on the camera for pairing.

Pre-Pairing Setup Requirements

Details camera and smart device prerequisites, including app installation.

Detailed Pairing Steps

Step-by-step instructions for establishing a Bluetooth connection between camera and smart device.

Troubleshooting and Additional Information

Resolving Pairing Failures

Procedures for when the camera and smart device cannot connect via Bluetooth.

Accessing In-App User Manual

Instructions on how to find further help within the SnapBridge 360/170 app.