What to do if the Nikon LITE TOUCH ZOOM 110S shutter cannot be released?
- EEugene HernandezAug 2, 2025
The shutter may not release for several reasons: * Ensure the slide cover is fully open until it clicks to turn the camera on. * If the orange LED is blinking, release the shutter after the orange LED lights up. * If “ ” lights up on the LCD panel, replace the film roll with a new one. * If there's no indicator on the LCD panel, replace the battery. * If all indicators blink, try opening and closing the slide cover again to power on. If that doesn't work, remove and reinstall the battery. * If the green LED is blinking, move the camera more than approximately 0.8m away from the subject.