Nikon SMZ18 - Base Specifications

Chapter 5 Specifications
59
 Base
Name Plain Base LED Diascopic Illumination Base Fiber Diascopic Illumination Base
Model P2-PB P2-DBL P2-DBF
Stage plate Black surface and milky white
surface,
Acrylic plate, 180 mm dia.
Attached to the base using a
fixing screw
Transparent glass plate, 180 mm
dia.
Attached to the base using a fixing
screw
Transparent glass plate, 180 mm
dia.
Attached to the base using a
fixing screw
Diascopic
illumination
None • Diascopic illumination through
an LED light source (bright field,
OCC)
• Prism sheet for shading
reduction: Removable
• LED illumination ON/OFF switch;
with a brightness control dial;
switchable LED brightness
control
• AC adapter input terminal
• LED brightness control terminal
• Power supply: Supply from the
control box or a 12 V AC adapter
• Diascopic illumination through
an external LED light source
and fiber (bright field, OCC)
• High/low magnification
condenser lens: Switching
method
• Filter (NCB11, ND4, ND16):
Removable
• Light source: C-FLED2 LED
Light Source for Fiber
Illuminator (Refer to the
instruction manual for the light
source.)
Attachable
devices
• P-SXY64 XY Stage
• C-SSL DIA Sliding Stage
• C-TRS Tilting Stage
• P-DF2 LED Dark Field Unit 2
• C-FDF Flexible Double Arm Fiber Illumination Unit (via a C-FIDH Fiber Holder)
• P2-POL Simple Polarizing Attachment (P2-DBL and P2-DBF only)
Others
• With the sliding mechanism (P2-DBL and P2-DBF only)
• With the screw holes for optional devices