Nikon SMZ18 - Stand Specifications

Chapter 5 Specifications
60
 Stand
Name Plain Stand LED Diascopic Illumination Stand Fiber Diascopic Illumination
Stand
Model P-PS32 P-DSL32 P-DSF32
Stage plate Black surface and milky white
surface,
Acrylic plate, 180 mm dia.
Attached to the base using a
fixing screw
Transparent glass plate, 180 mm
dia.
Attached to the base using a fixing
screw
Transparent glass plate, 180 mm
dia.
Attached to the base using a
fixing screw
Diascopic
illumination
None
• Diascopic illumination using an
LED light source (bright field,
OCC)
• With the LED power ON/OFF
switch and brightness control
dial, switchable LED brightness
control
• AC adapter input terminal
• LED brightness control terminal
• Power supply: Supplied from the
12 V AC adapter or P2-CTLB
Control Box
• Diascopic illumination through
an external LED light source
and fiber (bright field, OCC)
• High/low magnification
condenser lens: Switching
method
• Filter (NCB11, ND4, ND16):
Removable
• Light source: C-FLED2 LED
Light Source for Fiber
Illuminator (Refer to the
instruction manual for the light
source.)
Focusing
mechanism
None Support pillar vertical movement
system using the focus dial on the
base
Focusing stroke: 6.2 mm
Stroke per focus dial rotation: 3.24
mm
Support pillar vertical movement
system using the focus dial on the
base
Focusing stroke: 6.2 mm
Stroke per focus dial rotation:
3.24 mm
Attachable
devices
• P-SXY64 XY Stage
• Circular Floating Stage 2 (P-PS32 only)
• C-SSL DIA Sliding Stage
• P-DF2 LED Dark Field Unit 2
• C-TRS Tilting Stage
• C-LSL2 LED Epi Illuminator 2 (via an SMZ-U Epi Arm)
• C-FDF Flexible Double Arm Fiber Illumination Unit (via a C-FIDH Fiber Holder)
• C-FID2 Double Arm Fiber Illuminator
• P2-POL Simple Polarizing Attachment (P-DSL32 and P-DSF32 only)
Others
• With the sliding mechanism (P-DSL32 and P-DSF32 only)
• With the screw holes for optional devices
• Dedicated hex driver located at the top of the support pillar
• Support pillar exchangeable for a C-EP support (P-PS32: Approx. extra 100 mm, P-DSL32 and P-DSF32:
Approx. extra 145 mm)