Chapter 5 Specifications
61
Tube
Name Trinocular Tilting Tube Trinocular Tilting Tube Trinocular Tube L
Model P2-TERG 100 P2-TERG 50 P2-TL100
Angle of
depression
0 to 30° (continuously variable) 0 to 30° (continuously variable) 10°
Eyepiece
mount/tube
mount
optical-path
switching
By the optical path switching lever By the optical path switching lever By the optical path switching lever
Nosepiece, Focus mount adapter
Name Intelligent Nosepiece Focus Mount Adapter
Model P2-RNI2 P2-FM
Function
• A double-hole nosepiece that can hold two
objectives so that the objectives are switched
during observation. It can be used as an adapter
to connect the zooming body and the focus unit.
• The stereoscopic view and vertical view can be
generated by shifting the objective position.
• Hold the SMZ18/25 Zooming Body using its front
dovetail.
• Attached to the focus unit or motorized focus unit
using the rear dovetail
• Adapter to connect the zooming body and the focus
unit
• Hold the SMZ18/25 Zooming Body using its front
dovetail.
• Attached to the focus unit or motorized focus unit
using the rear dovetail.
Objective
mount
Dovetail
with the objective anti-fall mechanism
─
Status detection Detect the objective mount address and the vertical
view state.
Detected information is sent to the control box via
signal cable.
─
Objective
Name Objective Objective Objective Objective
Model P2-SHR Plan Apo 0.5X P2-SHR Plan Apo 1X P2-SHR Plan Apo 1.6X P2-SHR Plan Apo 2X
Magnification 0.5x 1x 1.6x 2x
Numerical
aperture
(maximum)
0.078 0.156 0.25 0.312
Working
distance
71 mm 60 mm 30 mm 20 mm
Parfocal
distance
150 mm 150 mm 150 mm 150 mm
Objective mount
Exclusively-shaped
bayonet
Exclusively-shaped
bayonet
Exclusively-shaped
bayonet
Exclusively-shaped
bayonet
Others Protection ring provided Correction glass
provided
With a correction ring
To Next Page
Loading...
