Nikon SMZ18 - Objective Lens Specifications

Chapter 5 Specifications
62
 Eyepiece
Name Eyepiece Eyepiece Eyepiece Eyepiece
Model C-W10XB C-W15X C-W20X C-W30X
Magnification 10x 15x 20x 30x
Field number 22 16 12.5 7
 Episcopic illuminator
Name Coaxial Epi Illuminator Flexible Double Arm
Fiber Illumination Unit
Ring Fiber Illumination
Unit
LED Ring Illumination
Unit 2
Model P2-CIA C-FDF P2-FIR P2-FIRL2
Magnification 1x ─ ─ ─
Episcopic
illumination
• Episcopic illumination
through a two-branch
fiber
• Light source: C-FLED2
LED Light Source for
Fiber Illuminator (Refer
to the instruction
manual for the light
source.)
• Episcopic illumination
through fiber branched
into two
• Light source: C-FLED2
LED Light Source for
Fiber Illuminator (Refer
to the instruction
manual for the light
source.)
• Used together with
C-FIDH Fiber Holder
• Episcopic illumination
through fiber
positioned like a ring
• Light source: C-FLED2
LED Light Source for
Fiber Illuminator (Refer
to the instruction
manual for the light
source.)
• Episcopic illumination
through an LED ring
(Refer to the
instruction manual for
the P2-FIRL2 LED
Ring Illumination Unit
2.)
 Epi fluorescence attachment
Name Epi Fluorescence Attachment Motorized Epi Fluorescence Attachment
Model P2-EFLI P2-EFLM
Magnification 1x 1x
Epi-fl
illumination
• Attachment of filter cubes to the internal turret
• Up to four filter cubes can be attached.
• Turret switching: Knob rotation method
• Light source: HG Precentered Fiber Illuminator
C-HGFI/C-HGFIE (Refer to the instruction manual
for the light source.)
• Attachment of filter cubes to the internal turret
• Up to four filter cubes can be attached.
• Turret switching: Motorized
• Light source: HG Precentered Fiber Illuminator
C-HGFI/C-HGFIE (Refer to the instruction manual
for the light source.)
 Remote control device
Name Remote Controller Foot Switch Photo Release
Model P2-RC AZ-FSW AZ-PCR
Function, etc. • Focus operation, zoom
operation, etc.
• Connected to the P2-CTLA
Control Box
• For details, see Chapter 8, “10.1
P2-RC Remote Controller.”
• Focus operation, zoom
operation
• Connected to the P2-CTLA
Control Box
• Image capture using a DS
camera
• Connected to the AZ-FSW Foot
Switch
 Relay device
Name Relay Box Relay Cable
Model P2-RLY P2-RLYC
Function, etc. • Relay of signals for motorized control of a device or
detection of the device status
• For details, see Chapter 8, “11.3 P2-RLY Relay
Box.”
• Relay of status detection signals with the SMZ18
Zooming Body and RELAY of the P2-CTLB Control
Box connected