Nikon VQA110AA Firmware Update

6
Mac
The message shown at right will be
displayed while the update is in progress.
Updating…
Do not turn camera off
during update!
The message shown at right will be
displayed when the update is complete.
Done.
Turn camera off to
complete update.
5
Conrm that the update was completed successfully.
5-1. Turn the camera o and remove the memory card.
5-2. Check the camera rmware version as described in Step 2, “Check the
current camera rmware version”.
5-3. If the updated version is displayed, the
update was successful.
COOLPIX XXXX Ver. **
“XXXX” is the camera name and “**” the rmware version.
If the update was not successful, contact a Nikon service representative.
6
Format the memory card in the camera.
This completes the rmware update.

Nikon VQA110AA Specifications

General

Brand	Nikon
Model	VQA110AA
Category	Digital Camera
Language	English