Nikon VQA110AA - Page 12

12
Get ready
Set the date and time, and
press O.
• Use J or K to select a field and
then use H or I to set the
date and time.
• Select the minute field and
press O to confirm the setting.
• Press m to display m on the screen and enable daylight saving
time. To disable daylight saving time, press m again.
When the confirmation dialog is displayed, press
R [Yes].
Use J or K to select the
screen design, and press
O.
Confirm the messages
about the waterproofing
and press K.
Confirm the message on the
screen shown at right and
press O.
• The screen for taking pictures
is displayed.
00000101
mhYMD
Date and time
2019
5
6
Menu background
7
Waterproong precautions
8
After drying thoroughly, use
a cloth to remove any
droplets remaining on the
areas indicated.
9