Nikon VQA110AA - Page 22

22
Connect to a smart device
Connecting the camera and a smart device
• Insert a memory card with sufficient free space into the camera.
• Make sure that the remaining battery levels of the camera and smart
device are sufficient.
• Enable Bluetooth on the smart device.
Press l, and then press
l [Camera settings] M
C [Network menu] M
V [Connect to smart
device].
When the dialog at the right
is displayed, start the
SnapBridge app.
• Follow the instructions displayed in the camera and the
SnapBridge app.
• For details on how to connect, see “Connecting to a smart
device (SnapBridge)” in the “Online Manual” (page 2).
• For details about using the SnapBridge app, see the
“SnapBridge Online Help” (page 2).
2 5m 0s
25m 0s
5 00
500
1
Camera name_XXXXXXXX
Camera
SnapBridge
App
On your smart device, go to the app
store and search for
SnapBridge. After installing,
open the SnapBridge app.
2