EasyManua.ls Logo

Niles HD525 User Manual

Niles HD525
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PRELIMINARY TECHNICAL DATA SHEET
SPECIFICATIONS
FREQUENCY
RESPONSE
Plus or minus 3 dB
HD-525: 55 Hz to 21 kHz
HD-650: 45 Hz to 21 kHz
HD-800: 35 Hz to 21 kHz
RECOMMENDED
AMPLIFIER POWER
HD-525: 10 to 100 watts
HD-650: 10 to 125 watts
HD-800: 10 to 150 watts
SENSITIVITY
88 dB 2.83V @ 1 meter.
IMPEDANCE
6 ohm nominal
HEIGHT X WIDTH
(With frame)
HD-525: 9 7/8” x 7 1/8”
HD-650: 11 11/16”x 8 3/4”
HD-800: 10 3/16” x 14 1/4”
HOLE CUTOUT
HD-525: 6 1/4” x 9”
HD-650: 7 5/8” x 10 5/8”
HD-800: 9 1/8” x 13 1/8”
DEPTH BEHIND WALL
(Assumes 1/2” drywall)
HD-525: 2 1/2”
HD-650: 2 15/16”
HD-800: 3 1/8”
INTRODUCTION
The HD High Definition group
offers loudspeakers designed for
superior sonic quality and dura-
bility. They employ advanced
technology components designed
to extract all of the subtle
nuances in recorded music or the
thunderous action in a movie.
They are perfect anywhere that
quality of sound is the most
important consideration.
CONTINUED OTHER SIDE
Mica-Filled Polypropylene
Woofers
The mica-filled polypropylene
cone achieves new standards in
transient speed and dynamic
range because of its phenomenal
rigidity and improved stiffness to
mass ratio. The inverted butyl
surrounds, the BumpBack
TM
mag-
nets and the rigid steel basket
are all optimized for large excur-
sions of the cone. In this way,
each of the HD speakers deliver
exceptionally deep and detailed
bass at realistic sound pressure
levels, without the mechanical-
ly induced limiting and distortion
of typical designs.
ElastoDynamic
TM
Hybrid
Dome Tweeter
Constructed from a composite
matrix of elastomers and natural
fiber substrates, the Elasto-
Dynamic
TM
tweeter offers extend-
ed high frequency response with-
out any harsh ringing or over-
shoot. Additionally, the elas-
tomers offer the added benefit of
weather resistance, making it
uniquely suitable for use out-
doors or in moist environments.
Acoustic Fine Tuning
An installer set “NORMAL/PRES-
ENCE” control located behind
the speaker baffle allows the
speaker to be tuned to your par-
ticular room acoustics. You can
adapt the sound for a room with
lots of furniture, heavy drapes
and wall to wall carpeting.
FEATURES AND BENEFITS
HD
525
HIGHDEFINITION
HD
650
HIGHDEFINITION
HD
800
HIGHDEFINITION
NILES
B LENDING H IGH F IDELITY
AND A RCHITECTURE
®
HD-525
• 5 1/4” Mica-Filled Polypropylene
Woofer with Inverted Butyl Rubber
Suspension
• 1” ElastoDynamic
TM
Wide
Dispersion Tweeter
• Complete System consists of:
HD-525 Speaker; 525 Bracket Kit
and 525 Frame/Grille Kit
HD-650
• 6 1/2” Mica-Filled Polypropylene
Woofer with Inverted Butyl Rubber
Suspension
• 1” ElastoDynamic
TM
Wide
Dispersion Tweeter
• Complete System consists of:
HD-650 Speaker; 650 Bracket Kit
and 650 Frame/Grille Kit
HD-800
• 8” Mica-Filled Polypropylene
Woofer with Inverted Butyl Rubber
Suspension
• 1” ElastoDynamic
TM
Wide
Dispersion Tweeter
• Complete System consists of:
HD-800 Speaker; 800 Bracket Kit
and 800 Frame/Grille Kit
HD HIGH DEFINITION — Designed for superior sonic quality and durability.
INTRODUCTION
FEATURES AND BENEFITS
®
Question and Answer IconNeed help?

Do you have a question about the Niles HD525 and is the answer not in the manual?

Niles HD525 Specifications

General IconGeneral
BrandNiles
ModelHD525
CategorySpeakers
LanguageEnglish

Summary

Specifications

Frequency Response

Defines the speaker's frequency range capabilities.

Recommended Amplifier Power

Specifies the suitable amplifier power range for each model.

Sensitivity

Indicates the speaker's efficiency in converting power to sound.

Impedance

Details the nominal electrical resistance of the speaker.

Physical Dimensions

Lists height, width, cutout, and depth for installation.

Introduction

Features and Benefits

Mica-Filled Polypropylene Woofers

Explains the benefits of the woofer cone material and design.

ElastoDynamic Hybrid Dome Tweeter

Details the features and advantages of the hybrid dome tweeter.

Acoustic Fine Tuning

Describes the speaker's internal control for room acoustics adjustment.

Weather-Proof Construction

Highlights the weather-resistant materials used for durability.

Flush Wall Appearance and Mounting

Explains the mounting system for a seamless, shadow-free appearance.

Infrared Sensor Mount

Describes the mounting provision for an infrared sensor for remote control.

X-Matrix Reinforced Baffle

Details the baffle design's contribution to sound quality and rigidity.

Six Ohm Impedance

Explains the benefit of the impedance for amplifier compatibility.

Low Diffraction Grilles

Describes the grille options and their acoustic properties.

Application Notes

Three Stage Installation System

Outlines a three-stage process for secure and paintable installation.

Easy Retrofit Installation

Details the simplified process for installing speakers in existing walls.

Instant Speaker Changes

Explains how speakers can be quickly swapped or replaced.

Hole Saving Bracket

Describes a bracket feature that aids drywall installation and wire management.

Related product manuals