Installation Considerations
Placement of the IRP2+
Place the IRP2+ conveniently close to the equipment it will be con-
trolling. Generally, the unit is placed in a concealed location because
its controls and indicators are only used during installation. Placement
possibilities include:
1) Table-top (on the floor or shelf behind the equipment) See Figure 2.
2) Wall-mount (affixed to the back of the equipment cabinet or a
nearby wall) See Figure 3 .
5
II
NN FF RR AA RR EE DD
EE
XX TT EE NN DD EE RR
-- MM
AA II NN
SS
YY SS TT EE MM
UU
NN II TT
IMPORTANT
Do not place the
IRP2+ on top of or
directly behind a
television set.
Some television
sets produce
intense electro-
magnetic interfer-
ence which may
disable your IR
extender system.
IRP2+
Base
Self-Adhesive
Velcro
®
strips
Figure 2: Table-Top Placement
1) Clean the bottom of the IRP2+
and the mounting surface with the
enclosed alcohol pad.
2) Affix the enclosed self-adhesive
rubber feet to the base of the
IRP2+.
Figure 3: Wall-Mount Placement
1) Clean both mounting surfaces with the
enclosed alcohol pad.
2) Affix the two enclosed strips of self
adhesive Velcro® to the back of the
IRP2+.
3) Mount the IRP2+ to the wall or cabinet
back. Allow the adhesive to set as long
as possible before connecting cables.
IRP2+
Base
Self-Adhesive
Rubber Feet
To Next Page
Loading...