Need help?Do you have a question about the Niles SSVC-4 and is the answer not in the manual?
General| Brand | Niles |
|---|---|
| Model | SSVC-4 |
| Category | Recording Equipment |
| Language | English |
Explains the SSVC series as a speaker selector and volume controller for multiple pairs of speakers.
Details power handling of 100 watts per channel RMS; 200 watts peak.
Allows selectable impedance magnification for 1, 2, 3/4, 5/6 pairs of speakers.
Includes individual room on/off switches, 12-step controls, and screwless connectors.
Features rugged metal chassis, non-skid feet, dimensions, and shipping weight.
States a ten-year limited warranty period.
Highlights low-profile design, recessed label areas, push-button operation, and volume control.
Details speaker pair connections, impedance magnification selection, and removable connectors.
Illustrates the wiring diagram for connecting to a receiver.
Shows how to connect wires to the SSVC-2 model's connectors.
Demonstrates wiring for use with a tube amplifier.
Details wire connection for SSVC-4 and SSVC-6 models.
Advises against using with amplifiers over 100 watts per channel at 8 ohms.
Explains how speaker pairs affect amplifier impedance load.
Instructs to count the number of speaker pairs being connected.
Guides setting the rear panel switch for speaker pairs.
Explains wire size using AWG, noting lower numbers mean larger wires.
Recommends 16/18 gauge stranded copper wire; 14 gauge for runs over 80 feet.
Mentions 'CL' fire rating requirements for in-wall speaker wire.
Advises routing speaker wires away from electrical devices to prevent noise.
Choose a convenient location for the SSVC-2/4/6 unit.
Run all necessary wiring and label it for future reference.
Strip 1/4" insulation and twist wire ends tightly.
Details connecting wires to the SSVC-2 removable connector plug.
Details connecting wires to SSVC-4/6 removable connector plugs.
Identifies 'AMPLIFIER' inputs and 'SPEAKERS' outputs; warns against reversing.
Affix pre-printed labels to recessed areas next to control knobs.
Ensure amp is OFF, volume minimum; turn on amp/receiver and select source.
Set listening level, adjust speaker volume using SSVC controls, turn off speakers.
Connect SSVC to "A" outputs if amp has "A"/"B" to prevent low impedance load.
Receiver/amplifier volume acts as the master volume for all connected speaker pairs.
Explains room size, speaker efficiency affect volume levels.
SSVC controls allow individual adjustment for each speaker pair.
Details audio power handling and frequency response.
Covers mounting, wiring requirements, dimensions, and weight.
Provides company name, website, address, phone, and fax numbers.
Congratulates the user on their purchase and promises years of trouble-free use.
Outlines warranty periods for different product types.
Lists void conditions and procedures for obtaining service.
Covers exclusive remedies, liability limits, and consumer rights.
Fields for model, serial number, date purchased, dealer, and personal details.
Questions about age, income, occupation, musical tastes, and purchase influences.
Asks about interest in other products and desired future capabilities.
States copyright year, printing location, and product code.
To Next Page
