EasyManua.ls Logo

Niles SW10 - Features and Benefits

Niles SW10
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NILES AUDIO CORPORATION 1-800-BUY-HIFI
3
FEATURES AND BENEFITS
10-INCH OR 12-INCH WOOFERS WITH INJECTION-
MOLDED TCC™ (TALC, CARBON AND CERAMIC) CONE
AND BUTYL-RUBBER SURROUND
The SW10 and SW12 feature either a 10-inch or 12-inch long-throw, front-firing woofer, in a ported
enclosure, for maximum bass response with reduced sonic breakup and lower distortion than
comparable models.
SOPHISTICATED MOTOR ASSEMBLY WITH HIGH BL
MAGNET AND EXTENDED POLE PIECE
The SW10 and SW12 woofer features a sophisticated motor assembly that combines a high BL
magnet and extended pole piece for deep bass response and clean bass tones.
ADVANCED AMPLIFIER DESIGN CREATES AMPLE
RESERVE MUSIC POWER
Powered by internal 125-watt and 260-watt advanced digital amplifiers, the SW10 and SW12 can
easily reproduce 260-watt peaks with very little heat produced.
RCA LINE-LEVEL AND LOUDSPEAKER-LEVEL INPUTS
In addition to gold-plated RCA line-level Left and Right inputs, the SW10 and SW12 feature
gold-plated, non-filtered RCA LFE (Low Frequency Effects) line-level input for a direct connection
from a 5.1 or 7.1 home theater sound processor. Using the “LFE” input bypasses the “Low Pass”
frequency control.
The SW10 and SW12 also have gold-plated, loudspeaker-level, five-way binding-post input
connections.

Other manuals for Niles SW10

Related product manuals