What to do if my Nilfisk-Advance E 145.3 Pressure Washer machine refuses to start?
If your Nilfisk-Advance Pressure Washer doesn't start, first, ensure it's properly plugged into a working socket. If the socket is functional, check the fuse and replace it if necessary. Also, try using the machine without an extension cable, as the cable might be defective.
What to do if my Nilfisk-Advance Pressure Washer stops?
If your Nilfisk-Advance Pressure Washer stops, first replace the fuse, if it has blown. Make sure that the mains voltage corresponds to the specification on the model tag. If the thermal sensor is activated, leave the washer for 5 minutes to cool down.
Why does my Nilfisk-Advance E 145.3 keep pulsating?
Your Nilfisk-Advance Pressure Washer might be pulsating due to several reasons. There could be air in the inlet hose or pump; in this case, allow the machine to run with the trigger open until the pressure stabilizes. Check that the water supply meets the required specifications and avoid using long, thin hoses. Also, inspect the nozzle for blockages and straighten out any kinks in the hose.
Why is my Nilfisk-Advance E 145.3 Pressure Washer pressure fluctuating?
Fluctuating pressure in your Nilfisk-Advance Pressure Washer can be due to the pump sucking air. Check that all hoses and connections are airtight. Valves or pump seals might also be dirty, worn out or stuck.
What to do if the fuse blows in my Nilfisk-Advance E 145.3 Pressure Washer?
If the fuse blows in your Nilfisk-Advance Pressure Washer, it might be too small. Replace it with a fuse that is higher than the machine's amp consumption. You may also try using the machine without the extension cable.
Why does my Nilfisk-Advance E 145.3 start, but no water comes out?
If your Nilfisk-Advance Pressure Washer starts but no water comes out, the pump, hoses, or accessories might be frozen, wait for them to thaw. Ensure there is a water supply connected.
Explanation of symbols used in the manual for safety and operation guidance.
Guidelines on using original accessories and spare parts for machine safety and longevity.
Covers physical/mental conditions for users, suitable applications, and required clothing.
Recommendations for transporting the machine and guidance on detergent usage.
Critical safety instructions for connecting the pressure washer to the electrical supply.
Procedures for safely shutting down, disconnecting, and storing the pressure washer.
Guidelines for performing maintenance and general repair recommendations.
Guide for assembling essential components like the handle, hose hook, and quick couplings.
Instructions for adjusting the telescopic handle for optimal user comfort.
Steps for connecting the high-pressure hose and mounting spray accessories.
Details on connecting the machine to various water sources.
Procedures for starting the machine and adjusting nozzle pressure for effective cleaning.
Information on how to use the pressure washer in a stationary configuration.
General cleaning advice, including detergent and foam application techniques.
Using brushes for tough dirt and examples of cleaning tasks for various surfaces.
Procedures for safely shutting down and disconnecting the machine after use.
Guide on cleaning water inlet filters and nozzles for optimal performance and longevity.
Instructions for cleaning machine vents and greasing O-rings for smooth operation.
Information on recommended accessories and cleaning agents for optimal use.
Details on warranty terms and key technical specifications of the pressure washer.
General| Pump Pressure (max) | 145 bar |
|---|---|
| Water Flow Rate (max) | 500 l/h |
| Hose Length | 9 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Water Flow | 10 l/min |
To Next Page
