Need help?Do you have a question about the Nilfisk-Advance MH 4M-200/960 FAX EU and is the answer not in the manual?
General| Model | MH 4M-200/960 FAX EU |
|---|---|
| Category | Pressure Washer |
| Max Pressure | 200 bar |
| Pump Pressure | 200 bar |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Cleaning impact | High |
| Inlet temperature max. | 60 °C |
| Pump (RPM) | 1450 RPM |
| Power Consumption | 4.0 kW |
| Power | 4 kW |
| Voltage/phase/frequency | 400 V / 3 / 50 Hz |
| Flow Rate (Qmax/Qiec) | 960 l/h |
Precautions for handling electronic components to prevent electrostatic discharge.
Describes the operational sequence when the machine is first powered on.
Explains how the heat exchanger and boiler system operate.
Step-by-step guide for disassembling the MH 3M pump.
Step-by-step guide for disassembling the MH 4M pump.
Introduction to boiler adjustments and required measurement equipment.
Steps for performing flue gas analysis for boiler optimization.
Method for identifying root causes of blown fuses by checking related components.
To Next Page