Need help?Do you have a question about the Nilfisk-Advance MH 3M and is the answer not in the manual?
Checking and cleaning water inlet filters.
Cleaning fuel system filters (filler neck and main).
Checking and refilling the pump oil.
Cleaning the flame sensor.
Checking and cleaning water inlet filters.
Cleaning fuel system filters (filler neck and main).
Checking and refilling the pump oil.
Cleaning the flame sensor.
General| Model | MH 3M |
|---|---|
| Category | Pressure Washer |
| Max Pressure | 150 bar |
| Pump Pressure | 150 bar |
| Motor Power | 3 kW |
| Power Consumption | 3 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Max. inlet temperature | 60 °C |
| Pump (RPM) | 1450 RPM |
| Electric cable | 5 m |
| Voltage/phase/frequency | 400 V / 3 / 50 Hz |
To Next Page
