What to do if my Nilfisk-Advance MH 1C is not drawing detergent?
If your Nilfisk-Advance Pressure Washer isn't drawing detergent, first, top up the detergent tank. If that doesn't work, clean the detergent tank. As a final step, remove the suction valve and either clean or replace it.
What to do if my Nilfisk-Advance MH 1C Pressure Washer has no indication and the main switch is on?
If your Nilfisk-Advance Pressure Washer shows no indication with the main switch on, turn the main switch to the “OFF“ position and allow the machine to cool down. Also, remove or disconnect any extension cables.
General| Pump Pressure (bar/MPa) | 110/11 |
|---|---|
| Voltage/phase/frequency (V/~/Hz) | 230/1/50 |
| Electric cable (m) | 5 |
| Weight (kg) | 27.2 |
| Water flow qmax/qiec (l/h) | 450 |
| Max. inlet temperature (°C) | 60°C |
| Water Flow (l/h) | 520 |
| Motor Power (kW) | 1.5 kW |
| Dimensions (mm) | 380x360x930 |
To Next Page