6
1)
Options / model variants
Original instruction
2 Description
2.1 Purpose This high-pressure cleaner has
been designed for professional
use. It can be used for clean-
ing agricultural and construction
equipment, stables, vehicles,
rusty surfaces, etc.
The cleaner has not been ap-
proved for cleaning surfaces
which comes into contact with
food.
Chapter 5 describes the use of
the high-pressure cleaner for
various cleaning jobs.
Always use the cleaner as de-
scribed in these operating in-
structions. Any other use may
damage the cleaner or the sur-
face to be cleaned or may result
in severe injury to persons.
MH 1C is for light professional
use only.
2.2 Operating elements
1. High pressure hose reel
1)
2. Top cover release
3. Cannister for detergent
4. Cable hook
5. Spray lance
6. Supply water connection
7. Spray lance storage
8. Hose hook
9. Tank filler for fuel
10. High pressure hose
connection for machines
without hose reel
11. Control panel
12. Power ON
13. Fuel low
14. Nilfisk AntiStone low
1)
15. Service interval due/expired
16. Boiler overheated
17. Flame sensor is sooted
18. Main switch
19. Temperature controller
20. Detergent metering knob
1)
See illustration at front of these
operating instructions.
To Next Page
Loading...
Need help?
General
