6
EN
4 Operating your pressure washer
4.1 Connection of high
pressure hose (models
without hose reel)
1. Mount the high pressure
hose on the outlet (3).
4.2 Mounting of spray
lance and Click & Clean
nozzles
2. Attach the nozzle.
Warning: When at-
taching the Click
& Clean noz-
zles, the pawl on
the side of the spray
lance should come out again.
Note: The Tor-
nado
®
PR noz-
zle and the foam
sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.
Press the pawl to detach the
Click & Clean nozzle.
4.3 Water connection NOTE: Connec-
tion to the public
mains according
to regulations.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional fi lter
should be mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
An ordinary 1/2" garden hose
of min. 5 m and max. 25 m will
be suitable.
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
Note: The spray lance (6)
has a built-in low pressure
nozzle that can be used for
fl ushing away dirt.
To Next Page
Loading...
Need help?
General
