Need help?Do you have a question about the Nilfisk-ALTO NEPTUNE 5 FA and is the answer not in the manual?
General| Pump (RPM) | 1450 |
|---|---|
| Voltage/phase/frequency (V/~/Hz) | 400/3/50 |
| Cord length (m) | 5 |
| No. of pistons | 3 |
| Ceramic pistons | Yes |
| Water Flow (l/h) | 1200 l/h |
| Motor Power (kW) | 5.5 kW |
| Dimensions (LxWxH) | 700x600x1010 mm |
| Voltage (V) | 400 V |
| Frequency (Hz) | 50 Hz |
| Pump Pressure (bar/MPa) | 150 bar / 15 MPa |
Guidelines for safe operation, user qualifications, and general precautions.
Warnings about high-pressure jets, recoil, and handling.
Safe transport, brake application, and essential pre-operation checks.
Safe water supply connection and electrical hookup precautions.
Warnings about hot surfaces, steam, exhaust, and flammable substances.
Safety guidelines for maintenance, repair, and component checks.
Defines the intended professional use of the high-pressure cleaner.
Identifies and lists the various controls and parts of the machine.
Safe transport, installation, and brake application procedures.
Assembling drums, filling detergent and anti-limescale tanks.
Information and instructions on using the anti-limescale system.
Instructions for filling the fuel tank.
Connecting the high-pressure hose.
Connecting the water inlet hose.
How to connect the machine to the electrical power supply.
Instructions for collecting antifreeze before operation.
Connecting accessories like the spray lance and spray gun.
How to start the machine for cold/hot water and steam operation.
Adjusting pressure with Tornado and Variopress devices.
How to use cleaning agents with the machine.
General advice for effective high-pressure cleaning, including soaking and foam application.
How temperature, mechanical action, and water flow affect cleaning.
Recommended cleaning methods for agriculture, vehicles, and industry.
Steps to safely shut down and disconnect the machine.
Storing the power cable, hose, and accessories.
Storing the machine, including frost protection measures.
Schedule for routine maintenance tasks based on time or usage.
Detailed procedures for cleaning water and oil filters.
Procedures for checking and changing the pump oil.
Draining the fuel tank for maintenance or storage.
How to clean and check the flame sensor.
Interpreting error codes displayed on the machine's screen.
Understanding status indicators on the control panel.
Troubleshooting other common operational issues and their solutions.
Proper disposal and recycling procedures for the machine.
Information about warranty terms and conditions.
EU declaration of conformity for the product.
To Next Page
