sm_POSEIDON 3_en_Ver.1.0_11.07
pha
This service manual contains detailed description of the main repair work on the cold high
pressure washer
POSEIDON 3.
Repair work requires a suitable working place with the necessary water and power supply.
If operating errors are evident, draw the customers attention to the ”Operators Manual”.
A fault in the high pressure washer can have several causes as described in the section on
troubleshooting.
Refer to the illustrated ”Spare Parts Catalogue” during repairs. It shows the assembly position
and the sequence in which the individual components should be assembled.
See ”Service Technical Information” (STI). They include information on technical
modifications that have been made after this repair manual was printed.
”Service Technical Information” is also valid as a supplement to the spare parts list until
publication of a new edition.
”Service Manual” and ” Service Technical Information” should be available at the workshop,
where the repairs are carried out.
It is not permitted to give them to third parties.
Use original Nilfisk-ALTO spare parts only.
Preface