EasyManua.ls Logo

Nilox DOC E-BIKE X3 - Bike Systems and Controls; Gear System Operation; Front Light; Pedal Assist (PAS) Control

Nilox DOC E-BIKE X3
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
EN
GEAR SYSTEM
The rear wheel is fitted with Shimano 6-speed gear (dérailleur) shifter.
Its use is identical to the use of traditional bicycle gearing and it is governed by
the classic lever located near the right-hand handlebar.
AS FOR TRADITIONAL BICYCLE GEARING, IT MUST BE USED WITH THE BICYCLE
IN MOTION.
FRONT LIGHT
DOC E-BIKE X3 is equipped with a 5-LED torch powered by common
alkaline batteries.
PEDAL ASSIST (PAS) CONTROL PANEL
The pedal assist (PAS) control unit is located on the left side of the handlebar.
On/Off
Battery level indicator
Three-speed PAS mode
DOC E-BIKE X3 is fitted with switches for pedal assist at three speeds.
THE PEDAL ASSIST FUNCTION CANNOT BE ACTIVATED WITH THE BICYCLE AT A STANDSTILL.
PAS operation:
Pedal and simultaneously activate the PAS. This method entails a greater use of current and a
greater wear of the motor.
Pedal until you create a certain inertia for the bicycle, activate the PAS and resume pedalling.
This method on the other hand allows greater savings in current and therefore a greater
protection of the motor.
Cycle while avoiding sudden speed changes; after braking resume pedalling prior to changing
the PAS setting.

Related product manuals