Nimbus Water Systems Five Water Maker WM5-50 User Manual

4
41840-A McAlby Court, Murrieta, CA 92562
(800) 451-9343, email: sales@nimbuswater.com
This system has been designed for installaon by a licensed professional such as a contractor or plumber. Proper compleon of this
installaon will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly
installed systems could result in water damage due to leaks or ooding. Do not use with water that is microbiologically unsafe.
System Specicaons
Membrane System w/Tank
Pressure 40-80 psi (275 kPa - 552 kPa)
Temp 40°F - 100°F (4°C - 38°C)
TDS <2000 mg/L
Chlorine <1.0 mg/L
Turbidity <1 NTU
SDI <5
pH 4-8
Performance Specicaons
Feed water must be potable, municipal water. Must
be free of potenal membrane foulants such as Iron,
Hydrogen Sulde and Manganese.
Producon 50 GPD 27 GPD
(189 LPD) (102 LPD)
TDS Rejecon 95% 95%
Recovery
1
35.4% 22.8%
Brine to Product 1.8:1 3.4:1
1
The percentage of the feed water available as reverse osmosis treated
water under normal operang condions.
Tested at 60 psig (4 bar), 500ppm TDS municipal water, 77°F (25°C)
Feed Water Requirements
System - 9.72” W x 13.75” D x 15.38” H ( 24.7 x 34.9 x 39.1 cm), 11 lbs. (5 kg.)
Shipping Box - 14.5"L x 11.25"W x 20"H (36.8 x 28.6 x 50.8 cm), 13.7 lbs. (6.2 kg.)
Dimensions and Weight
A. Product water storage tank
B. Tank valve
C. Tank tubing (3/8” white)
D. Air-gap faucet
E. Drain connecon assembly
F. Drain tubing (3/8” white)
G. Quick connect ng
H. Drain tubing (1/4” black)
I. Faucet tubing (3/8” blue)
J. Four-stage desalinator
K. Feed water tubing (1/4” green)
L. Inlet ng with shut-o
M. Carbon post-lter
A
B
J )
E
F
G
D
K
L
M
I
H
C (not shown)
(behind cover)

Nimbus Water Systems Five Water Maker WM5-50 Specifications

General

Brand	Nimbus Water Systems
Model	Five Water Maker WM5-50
Category	Water Filtration Systems
Language	English